MK1 Press Range

Rugged, versatile and dependable, the Mark 1 press satisfies the needs of all truss fabricators with a fast, efficient, single 30 tonne press head. It combines the best mechanical features with the latest in fabricating technology to provide you with a state of the art press for the 21st Century.

Featuring:

• 30 tonne hydraulic press with 700 x 500 mm platen
• Control panel with touch screen
• Pressing area dependant on number of tables
• Fully compatible with MiTek software
• Optical and mechanical high-speed emergency stops
• Pneumatic ejectors with individual stop valves
• Steel tables 4.2 – 4.8 x 1.93m with Halfen rails

MiTek recommend servicing the MK1 Press every 6 months.

The Mark-1 light and versatile single-cylinder press with a fully automatic continuous table . The large pressing plate can be specified with varying table widths and can be used in manual, teach and go or fully automatic modes.

Featuring:

• 25 tonne pressing capabilities
• Teach and Go
• File driven automation
• Stop/start on the hydraulic system
• One or two parking zones
• A smooth and quiet press with no ground rail.
• Remote Support via Wi-Fi Network
• Max table width: 4.2m

MiTek recommend servicing the MK1 Light Press every 6 months.

The MK1 baby is a small and compact 15 tonne single cylinder press. It is ideal ideal for the manufacture of small & low pitched trusses. The MK1 Baby press has a small overall footprint and works well in factory’s with limited space available.

Featuring:

• Ability to implement a pendulum system for faster truss production
• Manual teach and go
• Operator panel
• Max table width: 2.5m

MiTek recommend servicing the MK1 Baby Press every 12 months.